产品中心
新闻动态 当前位置:首页>新闻动态>新闻动态

目前水泥杆的蒸养方式

网址:www.baodingdiangan.com  2022-06-08  作者:admin    阅读:

目前水泥杆的蒸养方式不外乎有以下几种:电杆模内通蒸汽、坑式或者窖式的蒸养。内通蒸汽虽然节省了投资,操作起来方便,但是由于其存在着的蒸养效果不明显,蒸养时间不容易被控制,刚模的周转率特别低,能耗大等缺点白钢雕塑 小型滚揉机 防火电缆 托辊设备 水刀切割机  铜钟 石雕狮子  校园不锈钢雕塑 扭王块模具。目前已经被逐步淘汰。目前我厂采用的是坑式和窖式的养护工艺,原因是这两种工艺密封性好,蒸汽热量损失少、能耗少、蒸养时间短,提高了钢模的周转速度。
At present, the steaming and curing methods of cement poles are as follows: steam through the pole mould, pit-type or pit-type steaming and curing. Although it saves investment and is easy to operate, it has some shortcomings, such as low steaming effect, difficult to control steaming time, low turnover rate of rigid die and high energy consumption. It has been phased out. At present, pit-type and pit-type maintenance processes are adopted in our factory. The reason is that these two processes have good sealing, less steam heat loss, less energy consumption and shorter steaming and curing time, thus improving the turnover speed of steel mould

返回新闻

电话
18162053899