产品中心
新闻动态 当前位置:首页>新闻动态>新闻动态

很多人都对电线杆生产的过程没有见过

网址:www.baodingdiangan.com  2022-09-20  作者:admin    阅读:

很多人都对电线杆生产的过程没有见过,中间空心是如何做出来的呢,电线杆生产过程是很繁琐的。要细心、严谨。针对每一个环节都要严把质量关。生产车间的工人也是辛苦的。
Many people have not seen the production process of the pole. How to make the hollow in the middle? The production process of the pole is very complicated. Be careful and rigorous. We should strictly control the quality of every link. The workers in the workshop are also hard-working.
这是生产的原材料,中间的是钢丝,远处的是沙子和碎石。
This is the raw material for production, steel wire in the middle, sand and gravel in the distance.
图片
picture
1、首先需要将钢丝盘直,屋子里面有一个盘条机,因为逆光没有拍到,它把一捆一捆的钢丝盘直。。
1. First of all, the steel wire needs to be straightened. There is a wire rod machine in the room. Because the backlight didn't shoot, it straightens the bundles of steel wire..
图片
picture
2、根据电杆的长度,将盘直曲阳雕刻 水刀切割机 pvc软管 手套生产设备 保定平面设计培训 保定室内设计培训 果树反光膜的钢丝截成需要的长度,钢丝是要做成水泥电线杆的配筋(相当于纬线)。
2. According to the length of the pole, cut the coiled straight steel wire into the required length. The steel wire is to be made into the reinforcement of the cement pole (equivalent to weft).
图片
picture
3、这就是水泥电杆的模具,两半的。
3. This is the mold for the cement pole, two halves

返回新闻

电话
18162053899