电线杆生产过程是很繁琐的。要细心、严谨。针对每一个环节都要严把质量关。生产车间的工人也是辛苦的。
Many people have not seen the production process of the pole. How to make the hollow in the middle? The production process of the pole is very complicated. Be careful and rigorous. We should strictly control the quality of every link. The workers in the workshop are also hard-working.
这是生产的原材料，中间的是钢丝，远处的是沙子和碎石。
This is the raw material for production, steel wire in the middle, sand and gravel in the distance.
图片
picture
1、首先需要将钢丝盘直，屋子里面有一个盘条机，因为逆光没有拍到，它把一捆一捆的钢丝盘直。。
1. First of all, the steel wire needs to be straightened. There is a wire rod machine in the room. Because the backlight didn't shoot, it straightens the bundles of steel wire..
图片
picture
2、根据电杆的长度，将盘直的钢丝截成需要的长度，钢丝是要做成水泥电线杆的配筋（相当于纬线）。
2. According to the length of the pole, cut the coiled straight steel wire into the required length. The steel wire is to be made into the reinforcement of the cement pole (equivalent to weft).
图片
picture
3、这就是水泥电杆的模具，两半的。
3. This is the mold for the cement pole, two halves.
图片
picture
4、把盘直的钢丝每根电杆至少8根筋，我们公司为了稳固都要求是12根筋（这可是多了不止一根筋，）。同时用细钢丝盘成罗圈的纬线，环绕着作为纬线的钢丝，结合的地方用铁丝绑牢，这样在模具中就有了水泥电杆的龙骨。然后用一定比例的水泥浇灌满。
4. Each pole should have at least 8 steel bars. In order to be stable, our company requires 12 steel bars (this is more than one steel bar). At the same time, the weft wire coiled into a compass with thin steel wire is surrounded by the steel wire used as weft wire, and the binding place is bound with iron wire, so that the keel of cement pole can be found ie mold. Then fill it with a certain proportion of cement.